Metalwork cont.
Restoration:
'41 Dodge WC - Installed exhaust manifold and intake from a 1951 Dodge car. With a few holes drilled and tapped it fit fine and was in much better shape than the one that came off, as you can see!
'41 Dodge WC - Installed exhaust manifold and intake from a 1951 Dodge car. With a few holes drilled and tapped it fit fine and was in much better shape than the one that came off, as you can see!
Chassis Fabrication:
'52 Dodge Power Wagon - Rear pinion angle set and new spring perches added to Corp 14 rear axle and Corp 10 front axle. Front crossmember notched for clearance of new front motor mount plate.
'52 Dodge Power Wagon - Rear pinion angle set and new spring perches added to Corp 14 rear axle and Corp 10 front axle. Front crossmember notched for clearance of new front motor mount plate.
Restoration:
'41 Dodge WC - Rear half of frame cleaned of any surface rust and painted in preparation for new wood.
'41 Dodge WC - Rear half of frame cleaned of any surface rust and painted in preparation for new wood.
Restoration:
'41 Dodge WC - Replaced all front axle bearings and seals, replaced front spring bushings.
'41 Dodge WC - Replaced all front axle bearings and seals, replaced front spring bushings.
Chassis Fabrication:
'52 Dodge Power Wagon - Custom motor mounts fabricated to swap Chevy 292 inline 6, steel scatter shield, 4 speed trans, 205 transfercase onto original mounting locations on Dodge frame. Crossmember fabricated for trans/transfercase. Shop mascot not impressed...
'52 Dodge Power Wagon - Custom motor mounts fabricated to swap Chevy 292 inline 6, steel scatter shield, 4 speed trans, 205 transfercase onto original mounting locations on Dodge frame. Crossmember fabricated for trans/transfercase. Shop mascot not impressed...
Chassis Fabrication:
'31 Model A Sport Coupe - Custom made 1932 frame rails to go underneath the Model A body
'31 Model A Sport Coupe - Custom made 1932 frame rails to go underneath the Model A body
Chassis Fabrication:
'64 Ford Falcon - V8 & 5 speed swap, 8.8 rear axle swap, spring over axle lift in rear, Mercury Monarch front spindle/disk brake swap, updated 1965 steering assembly.
'64 Ford Falcon - V8 & 5 speed swap, 8.8 rear axle swap, spring over axle lift in rear, Mercury Monarch front spindle/disk brake swap, updated 1965 steering assembly.
